Weatherables WTR-THDBA36-S8S Instruction Manual

Browse online or download Instruction Manual for Unknown Weatherables WTR-THDBA36-S8S. Weatherables WTR-THDBA36-S8S Instructions / Assembly User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Step 1
Level
Mounting
Bracket
Post
Mounting bracket
Top Rail
Bottom Rail
Bracket Cover
Post Cap
Post Skirt
Pickets
Before beginning any installation the installer must review
all local building codes and use suitable safety equipment
and procedures.
If cutting material for installation double check all
measurements before cutting.
Some stair installation require longer posts. Test all
railing sections before cutting.
Standard stair brackets can accomodate angles of Standard stair brackets can accomodate angles of
30-40 degrees.
Plumb posts and install optional post skirt before installing rail mounting brackets.
Determine the distance between the deck and the bottom rail based on local code (Generally 2).
Subtract 1/4 to allow for the thickness of the mounting bracket and mark the post with a pencil.
Center the mounting bracket on the post and install the bottom of the mounting bracket on the drawn line.
Using the provided 1-1/2screws, fasten the mounting bracket to the post.
Stair installation requires the rail ends to be cut at the same angle as the stairs.
Lay the bottom rail along the stairs, making sure the holes for the pickets Lay the bottom rail along the stairs, making sure the holes for the pickets
are on the top of the rail.
Use a pencil to mark the rail angle. Repeat for the top rail.
Subtract 5/8 from the total length of the rails to allow for the mounting brackets.
Mark the bottom and top rail to the same length, ensuring the picket holes line
up before cutting the rail.
Cut the vinyl rail and the aluminum insert to the same length.
These instructions are designed to be supplemental; review all instructions with the
brackets before starting installation.
This step will be repeated on the opposite post.
Stair Railing Kit Instructions
THE MANUFACTURER WILL NOT BE HELD RESPONSIBLE FOR INCORRECT OR UNSAFE INSTALLATION.
It is the responsibility of the installer to conform to local building codes and safety requirements. It
is also the installers responsibility to obtain all necessary building permits. These instructions are
guidelines and do not cover every installation scenario. Separate instructions are included for
railing brackets and the railing foot block. If purchasing post mounts specific instructions will be
included within the packaging. Review all instructions before starting railing installation. The
installer may need to modify the exact installation method to meet unique site requirements.
Page view 0
1 2

Summary of Contents

Page 1 - Bottom Rail

Step 1LevelMounting BracketPostMounting bracketTop RailBottom RailBracket CoverPost CapPost SkirtPicketsBefore beginning any installation the installe

Page 2

Step 2 If using vinyl sleeves, it is easier to mark the mounting bracket position prior to installing them over wood posts or post mounts. The brack

Comments to this Manuals

No comments